Stainless Steel Air Conditioning Stamping Parts (EM-S-27)
|FOB Price:||Get Latest Price|
|Min. Order:||2,000 Pieces|
|Transport Package:||Carton, Pallet|
|Payment Terms:||L/C, T/T, D/P|
- Model NO.: EM-S-27
- Material: Stainless Steel
- Surface Processing: Polishing
- Tolerances: 0.2mm
- Purpose: Stamping Parts
- Origin: China
- Type: Cold Stamping
- Mould: Simple Single Process Dies
- Fine Blanking: Open
- Customized: Customized
- Specification: 4′′=G1/2 DN-15
The performance of the corresponding material for bulging formability, flanging performance, reaming forming performance and bending performance. To understand the stamping formability, we must first understand the stamping process. The basic stamping process are: drawing, bulging, flanging and bending processes (including reaming).
Deep drawing forming process
Deep drawing is a kind of stamping technology of hollow part which is made by using special tool to cut or cut open hollow parts.
The characteristic is that the plate is driven by the convex die, which can flow into the die, that is to rely on the material flow and elongation rate.
Bulging forming process
Expansion is the use of mold forced blank thickness reduction and surface area increases, in order to obtain the geometry of the parts stamping process.
The characteristics of blank holder was crushed to death, not to flow into the die, completely rely on the extension of material forming.
Flanging is used to mold blank on the hole edge or outside
A processing method for stamping edge vertical edges, in the middle stage of flanging, namely punch below material has not been completely transferred to the side before, if you stop the deformation, forming will be shown on the right, this process method called reaming, production and application are also common.
|Product introduction||φ21*22 φ11|